FURUNO 10.4 " MULTI-COLOR LCD RADAR SERIES  MODEL 1835/ 1935 / 1945 / 1937

ANTENNA RADIATOR
Type	Printed array	Slotted waveguide array
Antenna Length and Rotation Speed	Radome 60 cm (23.6") (ANT9210) 24 rpm	Open 100 cm (39.4") (XN10A) 24 or 48 rpm	Open 120 cm (47.2") (XN12A) 24 or 48 rpm	Open 120 cm (47.2") (XN12A) 48 rpm
Wind Load	-	24 rpm 100 kn relative wind 48 rpm 70 kn relative wind		70 kn relative wind
Beamwidth	Hor. 4.0° Vert. 20°	Hor. 2.4° Vert. 22°	Hor. 1.9° Vert. 22°	Hor. 1.9° Vert. 22°
RF TRANSCEIVER
Frequency	9410 ± 30 MHz (X-band)
Output Power	4 kW		6 kW	4 kW
DISPLAY
Screen Size	10.4" color LCD
Pixel Number and Screen Resolution	640 (V) x 480 (H), VGA
Effective Diameter	158 mm (62.2")
Echo Colors	32 levels
Display Modes	Head-up, Course-up*1, North-up*1, True view*1, True motion*2
Range Units	NM, SM, KM
Range Scales and Range Ring Intervals (NM)	Range: 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 1.6, 2, 3, 3.2, 4, 6, 8, 12, 16, 24, 32, 36, 48*3 64*4 Rings: 1/32, 1/16, 1/8, 1/4, 1/2, 0.8, 1, 2, 3, 4, 6, 8, 12*3, 16*4
Minimum Range	25 meters (82.0 ft)			16 meters (52.5 ft)
Range Discrimination	25 meters (82.0 ft)			15 meters (49.2 ft)
Echo Trails	Type True or relative trails Trail Length: 15, 30 sec., 1, 3, 6, 15, 30 min, or continuous Trail Trail Width: Narrow, Normal
Plotting Facilities (Required optional board ARP-11)	Acquisition: Auto, Manual Number of targets: 10 targets max.
AIS Functions (Data input from AIS is required)	Symbols: Sleeping, Activated, Dangerous, Selected, Lost targets Number of targets: 100 targets max.
INTERFACE
Input	AD-10 or IEC 61162 NMEA0183 Ver. 1.5/2.0/3.0
Output	IEC 61162 NMEA0183 Ver. 1.5/2.0/3.0
ENVIRONMENT
Temperature	Antenna Unit: -25℃ to +55℃(-13ﾟF to +131ﾟF) Display Unit: -15℃ to +55℃ (5ﾟF to +131ﾟF)
Waterproofing	Antenna Unit: IEC60529 IP26 Display Unit: IEC60529 IP55
POWER SUPPLY
Power Supply	12-24 VDC 4.1-2.0 A	12-24 VDC 6.8-3.3 A for 24 rpm 8.2-3.8 A for 48 rpm	12-24 VDC 7.3-3.5 A for 24 rpm 8.8-4.1 A for 48 rpm	12-24 VDC 8.1-3.8 A

※1：Heading data required※2：Heading and position data required
※3：For MODEL 1935/1945※4：For MODEL 1945

Standard

1. Display Unit
2. Antenna Unit
3. Antenna Cable 5*, 10, 15,
   20 or 30 m
4. Power Cable 5 m
5. Installation Materials and
   Spare Parts

• 1unit
• 1unit
• 1pc
   
• 1pc
• 1set

*For MODEL 1935/1945/1937

Option

1. Auto Plotter ARP-11
2. Rectifier
   PR-62 (For MODEL 1835)
   RU-3423 (For MODEL 1935/1945/1937)
3. External Alarm Buzzer OP03-21
4. Interface Cable
   MJ-B24LPF0010 10, 20, or 30 m
   MJ-A7SPF0007-050C 5 m
   MJ-A6SPF0007-100C 10 m
   MJ-A10SPFW0001+R 0.2 m
5. Antenna Bracket (for MODEL 1835) OP03-92

• ■： Option, related products or local supply
• ※1： For further info, contact our distributors

Bringing a New level of Quality, Operating and Reliability to Marine and River Radar. 

The radar echoes rotate in real time according to the heading change of your vessel independent of radar sweeps. This mode gives the operator a constant update on the radar picture around the own ship, which is vital for any navigation.

A selected AIS/ARPA target can be tracked and magnified in a zoom display. This zoom function expands the size of a selected target twice as much as its normal size in the zoom window.

*AIS FA-30/50/150 and Auto Plotter ARP-11 is required to display AIS and ARPA targets, respectively.

With the Full Screen Mode, the entire screen is filled with a radar image. Full-screen echo presentation capability allows the operator to observe a wider overview of the surrounding area.

With a push of the “OFF CENTER” button, own ship position is shifted to a pre-registered point on the screen. This allows the operator to focus on a specific area ahead of or around the vessel without losing track of the position.

There is also an option to clear the navigation data from the Radar display. Individual navigation data can be easily toggled ON or OFF from the menu.

Up to 100 AIS and 10 ARPA targets can be tracked and displayed on the Radar screen to assist the operator in tracking other vessels movement. AIS provides ships with means of exchanging ship data including: identification, position, course, and others, with other nearby ships and VTS stations.
Since AIS works on a VHF transceiver system, AIS targets are visible even if they are located behind large ships or islands unlike ARPA targets.

*AIS FA-30/50/150 and Auto Plotter ARP-11 is required to display AIS and ARPA targets, respectively.

The radar can display True Echo Trail to present true target movements in accordance with their speed-over-ground and course-over-ground.

With its advanced signal processing technology, the radar demonstrates substantial increases in target detection, particularly in close range.
In the picture below, the radar clearly distinguish and displays the small targets that are located closely with each other.